PipeLine CAI Xcalibrator 2 Information Form
The information you provide will be used to generate a custom SCT Xcalibrator 2 tune required for proper and optimal performance of the PipeLine Cold Air Inlet System for you vehicle. The custom tune(s) will be loaded into the Xcal 2 flash tool.
Your Name:
Phone Number:
Your Email Address:
Vehicle Year:	2005 2006 2007 2008
Transmission:	Manual Automatic
Important: The processor code from your vehicle must be included for proper calibration. The processor code is a 4 digit code located on a white sticker on the PCM (engine computer). The PCM is located in the engine compartment on the passenger side of the vehicle next to the fuse box.
Processor Code:
Please list all current modifications to the powertrain in the text area below. The information provided may be used to generate a custom tune for your vehicle, so be as specific as possible (brand, gear ratio, etc.) . Powertrain modifications include, but are not limited to, gear changes, aftermarket throttle body, CMRC delete plates, Nitrous, aftermarket fuel injectors. Note: Certain modifications or extensive modifications may require dyno tuning an/or may incur additional charges. Please contact us for further information.
Modifications:
Comments, Questions, Other: