|
|
|
|
|
|
| Home » 2005, 2006, 2007, 2008 Mustang Parts » S197 Mustang Drivetrain » 2005 Mustang V6 Manual 4" Aluminum Driveshaft & Safety Loop Pack |
| 2005 Mustang V6 Manual 4" Aluminum Driveshaft & Safety Loop Pack
|
|
|
|
|
|
PowerHouse Automotive, LLC 100% aluminum Driveshaft. Weighs 14 pounds, decreasing rotational mass.
The CHE Performance Driveshaft Safety loops is a direct bolt-in, NHRA approved design.
Fits 2005-Current Mustang 4.0L V6 Manual Transmission
100% Bolt in, no need to replace pinion flange and recheck rear gear setup
4 inch diameter aluminum tubing
3.0 inch 23 spline coupler, with nearly 3.5 inches of spline engagement.
Includes dust cover to protect the splined section from dirt and debris.
Includes all hardware, and necessary adapters.
Installation requires only common hand tools and can be done in less than 1 hour
*PHA-3KTV6MAN
Driveshaft Safety Loop
Fits 2005-Current Mustang V6 with Manual Transmission
NHRA Approved 1/4" thick by 2" wide CNC Cut baseplate
NHRA Approved 1"x .120" wall DOM tubular loop
Black texture powdercoat finish
Requires drilling
Removal of interior/carpet is not required, all installation is completed under the car
All required hardware included
|
|
|
|
|
|
|
|
|
