CHE Performance Products Installation Instructions   Poly/Delrin Control Arm Bushing Installation   APPLICATIONS: Mustang:1979-2004 Mustang Cobra:1993-1998 Mercury Capri:1979-1986 Thunderbird:1987-1988 Body Style:All Engine:All   DIAGRAMS   Step 1. Lubricate Control Arm Bushing Shell Using the supplied brush, apply a light coat of the supplied assembly lube to the inside of the control arm bushing shell. Click for large image   Step 2. Lubricate Polyurethane Bushings Apply a light coat of the assembly lube to the outside of the control arm bushings. Click for large image   Step 3. Install Bushings Install the polyurethane bushings in the bushing shells. Click for large image   Step 4. Lubricate Inside of Poly Bushings Apply a light coat of the assembly lube to the inside of the control arm bushings. Click for large image   Step 5. Lubricate Delrin Bearing 5. Apply a light coat of the assembly lube to the outside of the Delrin bearing. Click for large image   Step 6. Install Delrin Bearing 6. Press the Delrin bearing into the Poly Bushings until it is flush with the bushing face. A Shop or Arbor press is ideal; however, a vise will work as well. Do not hammer directly on the Delrin Bearing or it may be damaged. Click for large image     Click for large image   Step 7. Lubricate Crush Sleeve 7. Apply a light coat of the assembly lube to the outside of the Steel Crush Sleeve. Click for large image   Step 8. Lubricate inside of Delrin Bearing 8. Apply a light coat of the assembly lube to the inside of the Delrin bearing. Click for large image   Step 9. Install Crush Sleeve 9. Install the Steel Crush Sleeve into the Delrin Bearing until it is flush with the face of the Delrin Bearing. The Crush Sleeve should slide into the bearing relatively easily and rotate freely inside of the Delrin Bearing. Click for large image     Click for large image