| Step
1. Raise the Vehicle |
|
|
With the front wheels properly blocked;
raise the rear end of the vehicle as high as safely possible.
Place jack stands on a solid area under the vehicle. |
| Step
2. Remove Passenger Side Bolt |
| |
Remove the nut and flag-bolt retaining the factory brace to the passenger side of the vehicle. Save the nut and flag-bolt for re-use. |
| Step
3. Loosen Panhard Bar Bolt |
|
|
In order to free the brace from the vehicle, loosen the chassis side panhard bar bolt. Do not completely remove the panhard bar bolt.
|
| Step
4. Remove Driver's Side Bolts |
| |
Remove the 2 bolts retaining the factory brace to the Driver's Side frame rail of the vehicle, and remove the brace. Save the bolts for re-use later. |
|
|
Using the factory hardware, install the CHE Panhard bar brace in the vehicle following the reverse procedure of removal. |
|
|
Torque the panhard bar bolt to 125 lb-ft
Torque the Passenger Side brace bolt to 98 lb-ft
Torque the Driver's Side bolts to 46 lb-ft |
| |
Lower the vehicle and perform a road test. |
| Questions, Comments, Suggestions? |
| |
If you have any questions, comments, or suggestions regarding these instructions or product, whether they be good or bad, please do not hesitate to contact us immediately. Thank you, and enjoy your new CHE Performance Product. |
| Technical Support/Contact Information |
