APPLICATIONS:

Mustang:2005-Current

Body Style:All
Engine:All
 
WARNING!!: If you lack the necessary skill, tools, or equipment to safely complete this installation, have the component installed by a mechanic with the proper equipment and expertise.
 
Thoroughly read and understand these installation instructions before beginning the installation. If there is any doubt regarding the procedure, please contact CHE Performance prior to attempting installation
 
Step 1. Raise the Vehicle
   
  With the front wheels properly blocked; raise the rear end of the vehicle as high as safely possible. Place jack stands on a solid area under the vehicle.
   
Step 2. Remove Passenger Side Bolt
   
  Remove the nut and flag-bolt retaining the factory brace to the passenger side of the vehicle. Save the nut and flag-bolt for re-use.
   
Step 3. Loosen Panhard Bar Bolt
   
  In order to free the brace from the vehicle, loosen the chassis side panhard bar bolt. Do not completely remove the panhard bar bolt.
   
Step 4. Remove Driver's Side Bolts
   
  Remove the 2 bolts retaining the factory brace to the Driver's Side frame rail of the vehicle, and remove the brace. Save the bolts for re-use later.
   
Step 5. Install Brace
   
  Using the factory hardware, install the CHE Panhard bar brace in the vehicle following the reverse procedure of removal.
   
Step 6. Torque Hardware
   
  Torque the panhard bar bolt to 125 lb-ft
Torque the Passenger Side brace bolt to 98 lb-ft
Torque the Driver's Side bolts to 46 lb-ft
   
Step 7. Lower vehicle
   
  Lower the vehicle and perform a road test.
   
Questions, Comments, Suggestions?
   
  If you have any questions, comments, or suggestions regarding these instructions or product, whether they be good or bad, please do not hesitate to contact us immediately. Thank you, and enjoy your new CHE Performance Product.
   
Technical Support/Contact Information
   
e-mail:support@cheperformance.com
Phone: 814-402-0077
Website: www.cheperformance.com